APPLICATION
This semi automatic fast speed thermal ink ribbon barcode ribbon TTR slitter N2M is manufactured by advanced technology and superior components. It is used for cutting different quality of ribbons:wax ribbon, resin ribbon, wax resin ribbon. N2M is highly admired for its stable operations and high efficiency.
When you are going to Debug the Fast Speed Thermal Ink Ribbon Barcode Ribbon TTR Slitter, you need to pay attention to the following tips:
1. The power-on equipment is running dry, check whether the rotating parts and sliding parts are running normally, and check whether the equipment is vibrating or not. If there is any abnormality, it should be powered off in time, and check the situation to eliminate the fault. After everything is normal, check that the parameters on the display are displayed normally.If it can display normally and other operating conditions are good, you can test the machine to cut.
2. Install the lead roll (usually three), tape and adjust the position to wear the tape.
3. Install the cutter and adjust the position. The blade should be installed uniformly, the length is appropriate, it should not be extended too long, scratch the guide roller, try it after adjusting the knife to see if it will cut to the guide roller.
| BASIC SPECIFICATION | |
| 1 SLITTING WIDTH | 650mm-1010MM |
| 2 SLITTING THICKNESS | 4-20 MICRON |
| 3 UNWIND DIA. | 600MM (MAX) |
| 4 UNWIND CORE I.D. | SHAFTLESS 6 INCH |
| 5 REWINDING DIA. | 140MM MAX |
| 6 REWINDING WIDTH | MINI 25MM |
| 7 REWINDING CORE I.D | 1 INCH AIR SHAFT AND 1/2 INCH AIR SHAFT |
| 8 SLITTING UNIT | MAGNETIC RAZOR BLADE 30 PCS |
| 9 MECHANICAL SPEED | MAX300M/MIN |
| 10 WORKING SPEED | MAX300M/MIN |
| 11 MACHINE FRAME THICKNESS: | 30MM |
| 12 LEADER AND TRAILER STATION: | SEMI AUTOMATIC+RIBBON SAVING UNIT |
| 13 METER COUNTER: | ENCODE METER COUNTER |
| 14 WASTE EDGE UNIT: | SERVO REWINDING MOTOR |
| 15 POWER SOURCE | 380V, 50HZ, 3 PHASES AC 6KW |
REFERENCE PICTURE:
GUARANTEE AND SERVICE
1 100% Test and Check Before Shipment.
2 Detailed Instruction Manual.
3 One Year Guarantee for All Key Parts.
4 Installing and Operator Training Service Provided.
5 Whole-Life Free Technical Support.
6 Regular On-Site Routine Inspection.
ABOUT US
HAVESINO Group is a R&D and Manufacturer of Slitter Rewinder and Converting Machinery for the worldwide Packaging and Label industry over 12 years.There are in excess of 800 of machine installations worldwide!
RECOMMEND PRODUCTS
Fully Automatic Paper Core Notch Punching Machine
Tabletop mini ttr slitter
Hot Tags: fast speed thermal ink ribbon barcode ribbon ttr slitter, China, manufacturers, suppliers, factory, customized, wholesale, price, cheap, made in China