APPLICATION
TTR slitting machine is suitable for rewinding various ribbons.
Machine Speed:250m/min
Machine Body Thickness:30mm
Machine Weight:1800kgs
Unwind part:
Max Jumbo width: 1010mm
Jumbo outer diameter: 600mm
Jumbo core diameter: 6 inch shaftless
Electronically Jumbo left/right side adjustment
Servo drive system, automatic unwind tension control
Rewind part:
Two turret rewind system
Max rewind diameter: 110mm(optional 140mm)
Mini rewind width: 25mm
Two servo driver system for winding positions, automatic tension control.
Pneumatic driver pressing roller for ribbon winding
4 pcs 1 inch air shafts and 4 pcs half inch air shafts
Slitting system:
30 pcs Magnetic blade holder
Pneumatic driver blade holder shaft.
Semi - Automatic leader and trailer table:
Semi-auto leader and trailer table
Waste edge rewinder:
Two units waste edge motors to collect the waste edge
Waste edge manual tension control.
Electronic parts and power supply:
Touch screen
Delta servo motors
Siemens PLC
Electric: Single phase 220V 50HZ or as customer request
Air supply: 0.6-0.8 Mpa
The unwinding is charged by an air-expanding shaft, and is equipped with a carbon tape feeding and receiving table. The upper and lower winding units each have two winding shafts for exchangeable winding. Unique TTR-specific flattening device. A complete set of imported drives and pneumatic components. The whole machine adopts imported PLC+touch screen control, field bus technology, and adopts dynamic adaptive tension control software based on speed and diameter.
Each roll of high-quality ribbon with good compatibility and clear printing effect is the result of excellence in the slitting process. In addition to advanced slitting equipment, ribbon slitting manufacturers with high-quality ribbon slitting capabilities also need a clean and dust-free slitting workshop environment and a group of high-quality slitting technicians.
The tension control when the ribbon is slit affects the rewinding tightness of the ribbon. When the tension is too large, the PET base film of the ribbon will be stretched and damaged, which will cause physical changes in the ink layer attached to the base film, which is easy to produce ribbon. The quality problems of the toner drop will affect the printing effect, and even cause serious quality problems that the dropped toner contaminates the product.
If the tension of the ribbon is not enough when slitting, the ribbon will be easily wrinkled, resulting in poor printing such as white lines and indentations during printing. If the ribbon rewinding tension is too loose, it can also lead to quality problems such as die offset and ribbon slippage during transportation or installation of the finished ribbon.
Each newly purchased ribbon slitting machine needs a lot of debugging work after installation. During the debugging process, the most suitable tension interval is found. The data of this tension interval is the key data for the technicians to maintain the equipment in the later stage.
BASIC SPECIFICATION
FUNCTIONAL DESCRIPITION
Rewinding:
1. 30 pcs magnetic Clip Blade Holders, change slitting width quick and easy.
2. 4 pcs 1 Inch Air Shafts and 4 pcs 1/2 inch Air Shafts, make the core loading more easy. With the shafts holder, the rewinding shaft is stabel and faster.
3. Automatic tension control system, slitting perfect quality roll
4. SIEMENS PLC stable control and long life using
5. SEMI-AUTO leader and trailer table with ribbon saving function
GUARANTEE AND SERVICE
1 100% Test and Check Before Shipment.
2 Detailed Instruction Manual.
3 One Year Guarantee for All Key Parts.
4 Installing and Operator Training Service Provided.
5 Whole-Life Free Technical Support.
6 Regular On-Site Routine Inspection.
OUR FACTORY
Recommend Products
New Product
Fully Automatic Paper Core Notch Punching Machine
TTR Paper Core/Plastic Core Tracking No. Printing Machine
Mini Barcode Ribbon Slitter Rewinder
Hot Tags: ttr slitter barcode ribbon slitting machine, China, manufacturers, suppliers, factory, customized, wholesale, price, cheap, made in China